SHOTS FIRED!? VANDALS TRYING TO RUN OWNER OFF! MUNCHIE TO THE RESCUE!
IDigIt4・2 minutes read
The speaker is working on mulching job in Roseboro, North Carolina using an ASV with a TMC Canella mulcher head, encountering challenges with privet growth but increasing RPM for improved cutting efficiency. Despite obstacles, the mulching work progressed well, with the speaker satisfied with productivity and planning to clean up the machine for the next day's job.
Insights
- Increasing the mulcher's RPM by two turns significantly improved cutting efficiency during the mulching work near Roseboro, North Carolina, showcasing the impact of minor adjustments on productivity.
- Privet growth posed a challenge for the speaker during the job, emphasizing the importance of addressing potential obstacles such as vegetation that can impede machine performance and efficiency.
Get key ideas from YouTube videos. It’s free
Recent questions
What type of work is the speaker doing near Roseboro, North Carolina?
Mulching work using an ASV with a TMC Canella mulcher head.
How far is Roseboro, North Carolina from Myrtle Beach?
A 2-hour drive.
What challenges did the speaker face during the mulching work?
Privet growth scratching the machine and obstructing work.
How did the speaker enhance the mulcher's cutting efficiency?
By increasing the mulcher's RPM by two turns.
What steps are involved in adjusting the mulcher's RPM?
Turning a set screw on the hydraulic motor for an extra 300 RPM.
Related videos
Công Giáp Vlogs - Cuộc Sống ở Châu Phi
Công Giáp || Không Còn Lo Đói Nữa ! Phát Hiện Nguồn Thức Ăn Dồi Dào, Đặc Sản Miền Tây Việt Nam ???
Hùng KaKa Vlogs - Cuộc Sống ở Châu Phi
Hùng KaKa ll Người Dân Bất Ngờ Với Chiếc Máy Quá " Thần Kỳ " Của Việt Nam khi Xuống Ruộng ?
Casey LaDelle
This customer’s attitude changed the price…
Simple Living Alaska
Breaking Ground on the New Garden | Starting Over from Scratch
Welker Farms
This Land Hasn't Been Farmed In 30+ Years! Time For BIG BUD Iron!
Summary
00:00
Mulching Job Success in North Carolina
- The speaker is working on a day rate job near Roseboro, North Carolina, which is a 2-hour drive from Myrtle Beach.
- The job involves mulching work using an ASV with a TMC Canella mulcher head.
- The first phase of the job includes clearing out standing trees in a back field, mainly bradford pears and gums, to improve visibility and safety.
- The mulcher's RPM was increased by two turns on Friday, enhancing its cutting efficiency.
- The speaker encountered challenges with privet growth, which can scratch the machine and obstruct work.
- Instructions on adjusting the mulcher's RPM involve turning a set screw on the hydraulic motor, with two full turns providing an extra 300 RPM.
- The mulching work progressed well, with the speaker pleased with the productivity and the machine's performance.
- The speaker plans to clean up the machine after a successful day of mulching and prepare for another job the following day.
