La presión atmosférica, experimento y explicación teórica
Maestro Saúl・2 minutes read
Atmospheric pressure, or barometric pressure, is the force exerted by air on the Earth's surface, with the highest levels found at sea level, while its relationship with altitude is inversely proportional, decreasing as altitude increases. An experiment demonstrating this principle shows that boiling water creates vapor in a can, and when cooled, the vapor condenses, illustrating the crushing force of atmospheric pressure.
Insights
- Atmospheric pressure, or barometric pressure, is the weight of the air pressing down on the Earth's surface, highest at sea level at about 760 mmHg, and it decreases as altitude increases, as seen in the comparison between Mexico City's higher elevation and Acapulco's sea level.
- An experiment demonstrating atmospheric pressure involves boiling water in a can to create steam, then quickly inverting the can into cold water, which causes the steam to condense and form a vacuum, showcasing how atmospheric pressure can exert force by crushing the can when the internal pressure drops significantly.
Get key ideas from YouTube videos. It’s free
Recent questions
What is atmospheric pressure?
Atmospheric pressure, also known as barometric pressure, is the force exerted by the weight of the air above a given point on the Earth's surface. It is measured in various units, with the most common being millimeters of mercury (mmHg), hectopascals (hPa), and atmospheres (atm). At sea level, the standard atmospheric pressure is approximately 760 mmHg, which is equivalent to 1013.25 hPa or 1 atm. This pressure is highest at sea level and decreases with increasing altitude due to the diminishing weight of the air column above. Understanding atmospheric pressure is crucial for various scientific fields, including meteorology, aviation, and environmental science, as it influences weather patterns and air quality.
How does altitude affect pressure?
The relationship between altitude and atmospheric pressure is inversely proportional, meaning that as altitude increases, atmospheric pressure decreases. This phenomenon occurs because the density of air diminishes with height; there is less air above a given point to exert pressure. For instance, locations at higher elevations, such as Mexico City, which is situated around 2,200 meters above sea level, experience significantly lower atmospheric pressure compared to places at sea level, like Acapulco. This decrease in pressure can have various effects on human physiology, weather conditions, and even the performance of aircraft, making it an important factor to consider in both everyday life and specialized fields.
What is the formula for calculating pressure?
The formula for calculating atmospheric pressure is derived from the principles of hydrostatics and is expressed as P = ρgh. In this equation, P represents the pressure, ρ (rho) denotes the density of the fluid (in this case, air), g is the acceleration due to gravity, and h is the height above sea level. This formula illustrates how pressure is influenced by both the density of the air and the height at which it is measured. Understanding this relationship is essential for various applications, including meteorology, engineering, and physics, as it helps predict how pressure changes with altitude and informs the design of structures and vehicles that operate in different atmospheric conditions.
How to demonstrate atmospheric pressure?
To demonstrate atmospheric pressure, one can conduct a simple experiment using a few common materials. Gather a soda can, about 1 liter of water, a lighter, a small container, cotton, and a small amount of alcohol. Start by adding a small amount of water to the can and heating it until it boils, which produces water vapor that fills the can. After boiling, quickly invert the can into cold water, causing the steam to condense back into liquid water. This rapid temperature change creates a vacuum inside the can, leading to atmospheric pressure crushing the can from the outside. This experiment effectively illustrates the concept of atmospheric pressure and its omnipresence within the Earth's atmosphere, highlighting how it can exert significant force even in everyday situations.
Why is atmospheric pressure important?
Atmospheric pressure is crucial for several reasons, impacting both natural phenomena and human activities. It plays a vital role in weather patterns, influencing wind, precipitation, and temperature changes. Understanding atmospheric pressure is essential for meteorologists to predict weather conditions accurately. Additionally, atmospheric pressure affects human physiology; at high altitudes, lower pressure can lead to altitude sickness due to reduced oxygen availability. In aviation, pilots must consider atmospheric pressure for flight safety and performance, as it affects lift and engine efficiency. Furthermore, atmospheric pressure is fundamental in various scientific and engineering applications, including the design of buildings, vehicles, and instruments that operate under different atmospheric conditions. Overall, atmospheric pressure is a key factor in both the environment and technology.
Related videos
Bozeman Science
Gas Pressure
Sir Tarun Rupani
Pressure In Fluids and Atmospheric Pressure | ICSE Class 9 | @sirtarunrupani
Step by Step - Fisica e Mate
FISICA Teoria #17 - FLUIDI, PRESSIONE, PRINCIPIO di PASCAL, LEGGE di STEVINO
Xylem SSLC
SSLC Geography | Chapter 2 - In Search of Source of Wind | Most Important Topic | Xylem SSLC
DAV GURU
Chapter 4 | Force and Pressure | Class 8 DAV Science | Chapter Study | (Part 3) 🔥🔥🔥
Summary
00:00
Understanding Atmospheric Pressure and Its Effects
- Atmospheric pressure, also known as barometric pressure, is the force exerted by the air column of the atmosphere on the Earth's surface, with the highest pressure occurring at sea level, where it is approximately 760 millimeters of mercury (mmHg), equivalent to 1013.25 hPa (hectopascals) or 1 atmosphere (atm).
- The relationship between altitude and atmospheric pressure is inversely proportional; as altitude increases, atmospheric pressure decreases. For example, Mexico City, located at approximately 2,200 meters above sea level, experiences lower atmospheric pressure compared to Acapulco, which is at sea level.
- The formula for calculating atmospheric pressure is derived from hydrostatics: P = ρgh, where P is pressure, ρ is density, g is the acceleration due to gravity, and h is the height above sea level.
- To conduct the experiment demonstrating atmospheric pressure, gather the following materials: a can (such as a soda can), approximately 1 liter of water, a lighter, a small container (like a cleaned tuna can), cotton, and 3-5 milliliters of alcohol. Use metal or plastic tongs to handle the can safely.
- Begin the experiment by adding a minimal amount of water (less than one-tenth of the can) and heating it until it boils, indicated by the sound of boiling water and visible steam. This process converts liquid water into water vapor, filling the can.
- After boiling, quickly invert the can into cold water to create a rapid temperature change. This causes the water vapor to condense back into liquid, creating a vacuum inside the can, which results in atmospheric pressure crushing the can.
- The experiment illustrates that atmospheric pressure is always present as long as one is within the Earth's atmosphere, and it cannot be avoided unless in outer space, where there is no atmospheric pressure.
