CCTV Camera Installation with NVR | IP Camera, Hikvision NVR & PoE Switch Complete full Installation
Cisco Config・2 minutes read
The video illustrates how to set up an IPC CCTV camera system with a Pi switch, connecting devices like IP cameras, NVR, and access points via Cat6 cables to the Poe switch. To configure the system, a laptop or desktop PC is connected to the Poe switch to use the SADP tool to find IP addresses, log into the NVR, add IP cameras, and view camera feeds on the NVR interface.
Insights
- The installation and configuration of an IPC CCTV camera system using a Pi switch require physical connections using Cat6 cables, with the NVR linked to the Pi switch via LAN cable.
- A laptop or desktop PC connected to the Poe switch through Cat6 cable is essential for configuring IP cameras and NVR, utilizing the SADP tool to locate IP addresses, add cameras, and view feeds on the NVR interface.
Get key ideas from YouTube videos. It’s free
Recent questions
How do you install an IPC CCTV camera system?
By connecting devices to a Poe switch using Cat6 cables.
What tools are needed to configure IP cameras and NVR?
A laptop or desktop PC and the SADP tool.
What devices are connected to a Poe switch in an IPC CCTV system?
IP cameras, NVR, and a wireless access point.
How are IP cameras and NVR connected in an IPC CCTV system?
NVR is connected to the Pi switch via LAN cable, cameras to Poe switch using Cat6 cables.
What is the configuration process for an IPC CCTV camera system?
Use the SADP tool to find IP addresses, log into NVR, add IP cameras, and view feeds.
Related videos
Summary
00:00
"Installing IPC CCTV Camera System with Pi"
- The video demonstrates the step-by-step process of installing and configuring an IPC CCTV camera system using a Pi switch.
- The network diagram shows the connection of devices like IP cameras, NVR, and a wireless access point to the Poe switch.
- Physical connectivity involves using Cat6 network cables to connect devices like cameras, NVR, and an access point to the Poe switch.
- The NVR is connected to the Pi switch via a LAN cable, and cameras are connected to the Poe switch using Cat6 cables.
- To configure the IP cameras and NVR, a laptop or desktop PC is connected to the Poe switch using a Cat6 cable.
- The configuration process involves using the SADP tool to find the IP addresses of devices, logging into the NVR, adding IP cameras, and viewing the camera feeds on the NVR interface.
